Van den Hul Grasshopper III GLA
PRODUCTO AGOTADO Y DESCATALOGADO, NO DISPONIBLE
.
.
Capsula MC, bobina móvil. Cantilever de aleación. Aguja eliptica. Nivel de salida 0,6 mV.
Description: A custom handbuilt moving coil cartridge featuring: G = matched crystal Gold coils L = Low output (0.6 mV/channel) A = Alnico magnet Special customer demands/specifications: Thanks to the many variations in materials available, it is always possible to build a unit to match the personal demands of the customer. With these personalized cartridges the wooden container can mention the name of the customer it has been specially built for. This option is exclusively available for The GRASSHOPPER III series, The GRASSHOPPER IV, The GRASSHOPPER “BEAUTY”, The CONDOR and The COLIBRI versions. The customer demands/specifications that can be taken into account when building a personalized GRASSHOPPER III, IV, GRASSHOPPER “BEAUTY”, CONDOR or COLIBRI for instance are: The tone-arm used, the preamp and load impedance used, a particular brand of records to be played, the type of music generally played (jazz being more dynamic and classical more spacious and detailed) and other personal/sound preferences. Production time: The production time for a GRASSHOPPER cartridge after ordering is about two weeks. Please call your authorized distributor for delivery time. The after sales service: —Upgrade modifications from earlier version GRASSHOPPERS —Cartridge repair service —Retune service after run-in —Old GRASSHOPPERS / Spare parts Specifications: Cartridge Type GRASSHOPPER III GLA Unit Stylus Replacement Available see (*) Stylus Shape VDH - IS Stylus Radii 2 x 85 Micron Frequency Range 5 - 65.000 Hz Tracking Force 13.5 - 16 mN Static Compliance 35 Micron / mN Tracking Ability at 15 mN at 315 Hz 70 - 80 Micron Output Voltage at 1 kHz at 5.7 cm/s eff. 0.60 mV RMS Channel Unbalance < 0.3 dB Channel Separation at 1 kHz/10 kHz >38 / >32 dB Equivalent Stylus Tip Mass 0.32 Milligram System Weight 12.2 Gram Vertical Tracking Angle 22 Degrees Optimum Load Capacitance see (**) pF Recommended Load Impedance > 500 Ohm Recommended Eff. Tone arm Mass 6 - 10 Gram Moving Coil Resistance (per channel) 16 Ohm
16 productos de la misma categoría:
-
Ortofon Concorde Music Bronze
Ortofon Concorde Music Bronze | Aguja Diamante elíptico desnudo sobre un cantilever ...
399 € -
Audio Technica AT-VM95C Capsula
AT-VM95C Cápsula MM estéreo cónica serie VM95 | Cantilever de aluminio | Voltaje de ...
39 € -
Ortofon SPU Mono CG 65 Di MkII
Ortofon SPU Mono CG 65 Di MkII cápsula tocadiscos | Cápsula de bobina móvil (MC) de ...
999 € -
Project Pick it MM 5 Phono
Project Pick it MM 5 Phono - PRÓXIMAMENTE - cápsula | perfil de aguja de diamante el...
-
-
Ortofon 2MR Bronze - Rega
Ortofon 2MR Bronze - Nueva cápsula de altura reducida pensada para tocadiscos Rega u...
399 € -
Nagaoka MP-500H
Nagaoka MP-500H porta cápsulas | Incluye cápsula MP-500 y aguja de diamante superfin...
999 € -
Ortofon 2MRed Verso
Capsula MM, Imán Móvil. Cantilever de aleación, aguja elíptica, nivel de salida 5,5m...
125 € -
Ortofon SPU Classic GM E MkII
Ortofon SPU Classic GM E MkII cápsula tocadiscos | Cápsula de bobina móvil (MC) de m...
1.199 € -
Ortofon MC X20
Ortofon MC X20 - Cápsula MC | Sistema de bobinas cuádruples con plata de alta pureza...
499 € -
Sumiko Songbird
SongBird - MC. Aguja elíptica. Alta salida: 2,5 mV. Impedancia: 47 kΩ. Fuerza apoyo:...
999 € -
Project Pick it MM E Phono
Project Pick it MM E Phono - PRÓXIMAMENTE - Cápsula | Peso de sólo 5,5 gramos | Cuer...
-
Ortofon SPU Classic GM MkII
Ortofon SPU Classic GM MkII cápsula tocadiscos | Cápsula de bobina móvil (MC) de muy...
1.099 € -
Ortofon Concorde 5E
Ortofon Concorde 5E cápsula de imán móvil (MM) | Aguja elíptica de diamante y cantil...
79 € -
Grado Reference 3
Reference 3 cápsula tocadiscos | Serie Timbre | Aguja diamante elíptico | Cantilever...
1.499 € -
Rega Nd5
Rega Nd5 - Cápsula MM con imán de neodimio | Sistema de montaje Rega de 3 puntos | F...
349 €