Etapa Audiolab 8200M
Mono-Amplificador 250 W 8 Ohms;conexiones, XLR , Analgocio L&R IN - OUT; THD (20Hz-20kHZ) <0,05%; Sensibilidad de entrada: 1,65V RMS; Respuesta Frecuenca: 1-20kHz (+/- 0,05dB)
Dimensiones (WxHxD) 215x152x352 mm.
Colores Disponibles: Silver - Black
producto agotado y descatalogado. Sustituido por Audiolab 8300MB
A clean-sheet addition to the Audiolab range, the 8200MB is an advanced single-channel power amplifier capable of partnering loudspeakers of the highest calibre. With a rating of 250W, it is designed to deliver high power with ultra-low distortion.
In terms of sound quality, the 8200MB is an exceptional performer. Its high current ability enables it to drive the toughest of loads; even the most difficult speakers are driven cleanly without the loss of dynamics. The supreme neutrality that characterises Audiolab hi-fi components shines through, coupled to effortless reserves of current to call upon whenever required, so all you hear is the music – pure and unrestrained.
Supplying a choice of both balanced XLR and single-ended RCA inputs, the 8200MB is a power amplifier of enormous ability. Anyone seeking a flexible, compact, high-power monoblock for a stereo or multichannel system need look no further.
SpecificationRated Output Power: 250W/Channel into 8Ω, 2OHz-20kHz
Input Sensitivity: 1.63Vrms for 250W into 8Ω
Input Impedance: 20kΩ Balanced, 16kΩ unbalanced
Gain: 29.0 dB at 1 kHz; Signal To Noise Ratio (IHF, rel. 0.dBW); 88dB
Frequency Response: 20-20KHz±0.1dB, <0.1-120KHz-3dB
Total Harmonic Distortion & Noise: Less than 0.03%, 20Hz-20 kHz
Polarity (Phase): Non-Inverting
Muting: Muting controlled automatically
Operating Temperature Range: 10-35
Power Requirements (Depending on Region): 50-60Hz 100V, 110-120V, and 220-230V models available
Maximum Power Consumption: 380VA
Dimensions (WxHxD): 379x216x15Omm
Weight: Net: 9kg Shipping: 11kg
•Magnetic flux isolation
•Aluminum panel construction
•12 volt trigger standby
•High current to drive difficult loads
•Balanced XLR and single-ended RCA inputs
16 productos de la misma categoría:
-
Accuphase A-48
Accuphase A-48 etapa de potencia estéreo | 2x 45 W en pura Clase A | | Alto factor d...
11.700 € -
Moon Neo 330A
Neo 330A etapa potencia estéreo 125W RMS 8Ohms, construcción en aluminio, salidas RC...
4.500 € -
-
Chord TToby
TToby - Etapa de potencia de 100W a 4Ω. Relación señal a ruido >-103dB. Sliding B...
3.895 € -
Advance Paris BX2
BX2 Amplificador de potencia monofónico audiófilo de 215 Watios | High Bias,suminist...
989 € -
Opera Consonance Cyber 800 MKII
CYBER 800 MK2 -- Etapas de potencia monofonicas 2x78w. Amplificación a valvulas EL34...
4.899 € -
ArtSound PRH-4240
ArtSound PRH-4240 etapa de potencia línea 100V PRO | Salida 4x 240W | Funcionamiento...
839 € -
Parasound HALO A23+
HALO A23+ - Etapa de potencia estéreo (2 canales) de 160 Watios 8 Ohmios / 240 Watio...
2.999 € -
Wadia A102
Wadia A102 - Etapa de potencia estéreo 2x 150W a 4 u 8 ohmios | Entradas RCA y XLR |...
1.990 € -
Electrocompaniet AW250R
Electrocompaniet AW-250R Etapa de potencia Clase A | Dual-mono | Balanceada estereo ...
7.999 € -
Rotel RB-1552 MKII
Rotel RB1552 MK2 - Etapa potencia estereo de 120Watios RMS a 8Ohmios | Entradas RCA ...
1.149 € -
Moon 861 North Collection
Moon 861 North Collection- PRÓXIMAMENTE - Etapa de potencia estéreo de referencia -...
25.000 € -
Accuphase A-75
Accuphase A-75 etapa de potencia estéreo | 2x 60 W en pura Clase A | Compatible con ...
20.400 € -
-
Luxman MQ-88uC
Luxman MQ-88uC etapa de potencia a válvulas | Estéreo, 2x 25W a 8Ω | Válvulas de sal...
5.690 € -
B&W CDA-16
B&W CDA-16 - Amplificador multicanal - Salida de 16 x 100 W RMS sobre 4 ohmios ...
2.000 €