Audiolab 8000x7

Etapa de potencia de 7 canales reconfigurable; 7x100 W RMS o 5x100 W RMS+1x150 W RMS o 3x100 W RMS+2x150 W RMS sobre 8 ohmios; Entrada de 1'05 V RMS para obtener la potencia nominal; 445 x 131 x 338 19 kg Plata y Negro 2.199 € Impedancia de entrada de 47 kohmios; Relación seńal/ruido superior a 90 dB. The 8000X7 is a genuine one-box, seven channel power amplifier, capable of handling even difficult loudspeaker loads. The 8000X7 home theatre power amplifier delivers 7 x 100Wrms power. However, you can also run it in five or six channel mode too. By bridging two channels it is possible to create a more powerful single channel - especially useful if your front left and front right speakers are more performance critical than the other speakers in your 5.1 system. This can be achieved simply by changing switch settings on the rear of the unit. The 8000X7 is gain matched with the other 8000 series power amplifiers, and indeed the Power section of the 8000S integrated amplifier. It will work happily in combination with any of these should the demands of your system change in time. Unobtrusive, with an elegant simplicity, the 8000X7 is a compact yet powerful performer. Power output 7 x 100W into rated load impedance (8 Ohm) IHF toneburst power 7 x 120W (8 Ohm) Input for rated power 1.05 Vrms Input impedance 47 kOhm Gain +29 dB at 1 kHz Signal to noise better than 90 dB (relative to 0 dBW) unweighted Frequency Response 1.5 Hz - 150 kHz (-3 dB) Input connector RCA