Marcas

Marcas

Altavoz central Tannoy Mercury FC Custom

Altavoz Tannoy Mercury FC custom
Novedad

producto agotado y descatalogado. No disponible

Color elegido
Producto con envío gratuito

  • Designed to partner the rest of the Mercury F Custom range in a variety of home theatre system configurations, the FC Custom centre channel speaker is voiced to ensure clarity, tonal balance, coherence and well focussed imaging and effects across the front soundstage. Altavoz central. 2 vias, 8 ohmios. Puerto reflex trasero. -- ultima unidad en color Apple -

    A compact and solidly constructed speaker, the FC Custom is shielded to prevent colour fringing effects when placed close to screens.
    FC CustomThe Mercury F Custom series loudspeakers utilise materials and components carefully selected to optimise the system performance. Dense wood material used for the cabinet construction, including a substantial MDF front baffle, provides the essential cabinet rigidity required of a good loudspeaker design. The bass and treble units are solidly built providing exceptional acoustic performance and long-term reliability.

    The Mercury FC Custom upgrades deliver excellent sonic enhancements:
    Crossover - the crossover components have been upgraded, including a high quality polypropylene capacitor used in the tweeter feed, and the circuit topology revised to deliver greater high frequency detail, better imaging and more control at the bottom end.

    Wiring - the internal wiring has been replaced with high purity Van den Hul silver plated cable for lower energy loss and greater transparency.

    Termination panel - the termination panel has been upgraded with high quality gold plated brass terminals to optimise the signal transfer with minimum information loss.

    The bass performance is clean and precise while the mid and high frequency presentation is accurate, clear and dynamic. This natural sounding acoustic balance allows the Mercury FC to reveal all the centre channel detail of original soundtracks with an expansive front soundstage of dept and presence, this as well as delivering the subtle nuances of complex multi channel audio recordings. One listen and you'll know precisely what we're talking about.
    Mercury FC Custom
    PERFORMANCE
    Recommended amplifier power 10 - 90 Watts RMS
    Continuous power handling 70 Watts RMS
    Peak output power 140 Watts
    Low frequency response 68Hz
    Sensitivity 90dB
    Nominal impedance 8 ohms
    Frequency response 38Hz - 20kHz
    DRIVE UNITS
    High frequency 25mm (1.00") Nitro-Urethane layer damped woven polyester dome, shielded neodymium magnet assembly
    Low frequency 2 x 100mm (4.00") coated multi-fibre paper pulp cone
    CROSSOVER
    Frequency 2.7kHz
    Type 4th order acoustic linkwitz-riley
    CONSTRUCTION
    Enclosure type Front reflex. 15mm (0.59") particle board, internally cross-braced enclosure.
    Shielding Yes
    Volume 5.3 litres (0.2 cubic feet)
    Dimensions 150 x 430 x 170mm (5.75 x 16.75 x 6.75")
    Weight 5.3kg (15.2lbs)

    Finish Apple or Dark Oak
     

    Altavoz Tannoy Mercury FC custom
    Novedad

    16 productos de la misma categoría: